5.1 CVS

Belt Width: 400 ~ 2000 mm (16 ~ 79 inch) standard frames. Up to 3000mm (118 inch) with custom mount

Belt Speed: 0.1 ~ 12 m/s (0.33 ~ 39 ft/s)

Accuracy: > 98.5% typical*

Speed Sensor: Inductive speed sensor (proximity switch)

Ethernet Interface (LAN): Gigabit Ethernet (weatherproof RJ45 connector)

Wireless Interface (WLAN): 2.4 or 5 GHz 802.11n/ac (configurable band, hotspot or client mode)

Supported Communication Protocols: HTTP RESTful API, Modbus TCP

Power:

Voltage: 9 ~ 36 VDC (90 ~ 305 VAC with external CVS-1PS power-supply option)

Current: 3A max. @ 24 VDC with heater off, 6A max. @ 24 VDC with heater on (at start-up below 5°C)

Laser Scanner:

Laser safety: Class 1 (eye-safe)

Field of View: 90°

Angular resolution: 0.667°

Scan rate: 100 Hz

Operating Temperature

CVS-1S: -30 ~ 50°C (-22 ~ 122°F)
CVS-1W: -40 ~ 60°C (-40 ~ 140°F)

Weight:

CVS scan head (including WiFi): 10 kg (22 lb)
Small aluminium frame (excluding CVS scan head): 23 kg (51 lb)
Medium aluminium frame (excluding CVS scan head): 28 kg (61 lb)
Large aluminium frame (excluding CVS scan head): 32 kg (70 lb)

Dimensions:

See 5.3.1 CVS Frame Sizes dimensional drawings below

*Unadjusted surface volume measurement. Does not account for variations in product density affecting corrected volume or weight (mass) computations. Assumes belt position and profile does not change significantly.

5.2 CVS-I/O (option)

4-20 mA current loop outputs
Number of outputs: 4
Current load resistance: 400 Ω
Isolation voltage: 2500 VDC

4-20 mA current loop inputs
Number of inputs: 2
Overvoltage protection: 240 Vrms
Overcurrent protection: 50 mA max. at 110 VDC/VAC max.
Input impedance: 125 Ω
Isolation voltage: 2500 VDC

Digital Switching Outputs
Number of outputs: 4
Type: Form A solid-state relay (bipolar)
Maximum load voltage: 60 VDC/VAC
Maximum load current: 0.7 A @ 60 V
Isolation voltage: 3000 Vrms
Digital Switching Inputs
Number of inputs: 2
Type: Wet contact (bipolar sink/source)
ON voltage: 10 ~ 50 VDC
OFF voltage: 0 ~ 4 VDC
Input impedance: 10 kΩ
Overvoltage protection: 70 VDC
Isolation voltage: 3000 Vrms
Minimum pulse width (for reset signal): 50ms

Power
Voltage: 12 ~ 30 VDC (90 ~ 305 VAC with external CVS-1PS power-supply option)
Current: 0.3 A max. @ 24 VDC
Operating Temperature: -25 ~ 60 °C (-13 ~ 140°F)
Enclosure rating: IP65
Weight: 6 kg (13.2 lb)

Dimensions: see 5.3.2 CVS-I/O Enclosure dimensional drawings below

5.3 Dimensional Drawings

5.3.1 CVS Frame Sizes

*Note that S, M and L frame extenders can be interchanged to produce extra high or extra wide variations.

5.3.2 CVS-I/O Enclosure

mm [inches]