General specifications
Measurement range (per bin) |
0 – maximum load (for measurable vehicle types) |
Measurement resolution |
0.1 m3 / 0.1 yd3 |
Measurable vehicle types |
MPS-3BMP, MPS-3TMM standard mounting: conventional (rectangular bodied) open bin on-road trucks and articulated semi-trailers (including bottom-dump and side-tipper); articulated underground mine trucks up to 60t; articulated and rigid off-highway dump trucks up to 45t approx.
MPS-3CMX custom mounting: |
Minimum measurable bin capacity |
10 m³ (13 yd³) |
Measurable load types |
Flowable solids (bulk loose materials) including: muck (blasted rock/ore); overburden/waste (rock, clay, soil); construction aggregates; processed particulate materials |
Typical measurement accuracy |
Better than 1% to limit of resolution (for average load particle size less than 200mm (8″)) |
Vehicle speed (during scanning) |
0.5 – 6.0 km/h (0.3 – 3.7 mph) standard mode 1.0 – 12.0 km/h (0.6 – 7.4 mph) fast mode (large rigid dump trucks only) |
Power requirements |
110 – 240 VAC, 50/60Hz, 4A max (24VDC, 14A max option) |
Laser protection |
Class 1 (eye-safe) |
Clearance (from ground) |
MPS-3BMP, MPS-3TMM: 6.3 m (20.7′) minimum MPS-3CMX: application dependent |
Rated operating conditions
Operating temperature |
Scan head, message board: -30 – 50oC (-22 – 122oF) (-40oC – 50oC (-40oF – 122oF) for heavy duty variant)
Operator kiosk: -20 – 50oC (-4 – 122oF) |
Minimum visibility |
50 m (164′) (dense fog) |
Maximum scan-track gradient |
5 degrees (9%) |
Maximum scan-track camber |
3 degrees (5%) |
In this Article
General specifications
Measurement range (per bin) |
0 – maximum load (for measurable vehicle types) |
Measurement resolution |
0.1 m3 / 0.1 yd3 |
Measurable vehicle types |
MPS-3BMP, MPS-3TMM standard mounting: conventional (rectangular bodied) open bin on-road trucks and articulated semi-trailers (including bottom-dump and side-tipper); articulated underground mine trucks up to 60t; articulated and rigid off-highway dump trucks up to 45t approx.
MPS-3CMX custom mounting: |
Minimum measurable bin capacity |
10 m³ (13 yd³) |
Measurable load types |
Flowable solids (bulk loose materials) including: muck (blasted rock/ore); overburden/waste (rock, clay, soil); construction aggregates; processed particulate materials |
Typical measurement accuracy |
Better than 1% to limit of resolution (for average load particle size less than 200mm (8″)) |
Vehicle speed (during scanning) |
0.5 – 6.0 km/h (0.3 – 3.7 mph) standard mode 1.0 – 12.0 km/h (0.6 – 7.4 mph) fast mode (large rigid dump trucks only) |
Power requirements |
110 – 240 VAC, 50/60Hz, 4A max (24VDC, 14A max option) |
Laser protection |
Class 1 (eye-safe) |
Clearance (from ground) |
MPS-3BMP, MPS-3TMM: 6.3 m (20.7′) minimum MPS-3CMX: application dependent |
Rated operating conditions
Operating temperature |
Scan head, message board: -30 – 50oC (-22 – 122oF) (-40oC – 50oC (-40oF – 122oF) for heavy duty variant)
Operator kiosk: -20 – 50oC (-4 – 122oF) |
Minimum visibility |
50 m (164′) (dense fog) |
Maximum scan-track gradient |
5 degrees (9%) |
Maximum scan-track camber |
3 degrees (5%) |