LVS Quick Reference Guide
Scan Track establishment
More more information, refer to Appendix 2 of the Operator Manual here.
Scanner alignment
- Main Screen > Select System > P/W TALLY
- Make sure […]
Appendix 2 – Scan Head Installation and Alignment – Operator Manual – LVS-3 Series Rev5
The following procedures must be carried out every time an LVS is installed in a new location.
These procedures must be performed to correctly install and align the scan head and define the […]
Reviewing Measurement Records – Operator Manual – LVS-3 Series Rev6
Introduction The Records screen (figure 28) displays measurement records.
Access is from the RECORDS button on the Main screen. The ‘system’ or ‘user’ password is required, depending on password settings.
Figure […]
User Configuration Options – Operator Manual – LVS-3 Series Rev6
The Settings screen (figure 14) provides options for customising the LVS configuration.
Access this screen from the SETTINGS button on the Main screen. The ‘system’ password is required.
Figure 14 – […]
Vehicle Database Management – Operator Manual – LVS-3 Series Rev6
The Vehicle Database screen displays details of any vehicle recorded in the database.
Basic Operation – Operator Manual – LVS-3 Series Rev6
This section describes basic operation of the LVS after installation and commissioning.